Share

DIY Balloon Rope Streamers

Share

MrKate_DIWhyNot_4thOfJuly-25

I made these balloon rope streamers for Fourth of July, but they can be made for ANY holiday or event!  The best thing about this balloon decor is that NO HELIUM is needed.

To watch the video this DIY was featured in, check out DIWhyNot Fourth of July Party

MrKate_DIWhyNot_4thOfJuly

Prep It:

MrKate_DIWhyNot_4thOfJuly-5

MrKate_DIWhyNot_4thOfJuly-6

MrKate_DIWhyNot_4thOfJuly-4

MrKate_DIWhyNot_4thOfJuly-9

MrKate_DIWhyNot_4thOfJuly-10

MrKate_DIWhyNot_4thOfJuly-7

MrKate_DIWhyNot_4thOfJuly-8

MrKate_DIWhyNot_4thOfJuly-11

Do It!:

  1. Prep your rope pieces by tying them up where you want them to hang and then cut the ends to size. TIP: I put tape around the ends of the rope so that when I cut my rope pieces they didn’t fray.
  2. Blow up and tie the balloons and attach each one to the rope with a piece of twine. I chose to group the colors together but you could alternate or do whatever you want!
  3. Tie your streamers up to your overhang and enjoy!

MrKate_DIWhyNot_4thOfJuly-27

MrKate_DIWhyNot_4thOfJuly-52

Comments

Add comment

E-mail is already registered on the site. Please use the Login form or enter another.

You entered an incorrect username or password

Sorry, you must be logged in to post a comment.