Share

DIY Fabric Scrap Garland

Share

MrKate_DIWhyNot_4thOfJuly-38

I made this whimsical, fabric scrap garland for Fourth of July, but really, it can be made with any colors to celebrate any holiday or festivity!

To watch the video this DIY was featured in, check out DIWhyNot Fourth of July Party

MrKate_DIWhyNot_4thOfJuly-2

Prep It:

  • different colored fabric (I used cotton canvas and linen)
  • scissors
  • twine

MrKate_DIWhyNot_4thOfJuly-15

MrKate_DIWhyNot_4thOfJuly-17

MrKate_DIWhyNot_4thOfJuly-19

MrKate_DIWhyNot_4thOfJuly-20

MrKate_DIWhyNot_4thOfJuly-50

Do It!:

  1. Make a cut in your fabric about 2 to 3 inches wide and tear along the width of the fabric bolt.
  2. Tie the fabric strips to your twine.
  3. Tie the twine ends up to your overhang (or tape up to the ceiling) – You may need to trim your strips of fabric at this point.
  4. Repeat until you feel you have enough garlands to create a full and lively scene!

MrKate_DIWhyNot_4thOfJuly-36

MrKate_DIWhyNot_4thOfJuly-39

Comments

Add comment

E-mail is already registered on the site. Please use the Login form or enter another.

You entered an incorrect username or password

Sorry, you must be logged in to post a comment.